Search the forums

Loading

Dust Collection for Skilsaw wormdrive...

tom_herman's picture

*
Has anyone seen a dust collection system for the model-77 Skilsaw ??

I guess it would involve a new bladeguard or shroud with an ejection port, since there is nothing there now.

I'm going to be doing work inside my own house, and want to keep the dust & mess to a minimum.

(post #165796, reply #1 of 3)

*
Tom,

To answer your question, I have no idea as to whether dust collecting devices are available for a skil wormdeive. I would assume that you are doing finish work, which is why you prefer to keep the dust down. If that is the case, you should look at a sidewinder saw (dewalt makes a good one) which I think you will find are much easier to control than a wormdrive. Either way, good luck.

Jon

(post #165796, reply #2 of 3)

*
Jon
b Don't start that one again.

Those of us who use the beasts can control them just fine.

jim

(post #165796, reply #3 of 3)

*
Has anyone seen a dust collection system for the model-77 Skilsaw ??

I guess it would involve a new bladeguard or shroud with an ejection port, since there is nothing there now.

I'm going to be doing work inside my own house, and want to keep the dust & mess to a minimum.