Search the forums

Loading
Home › Forums › Breaktime › The Archives

how do I access an article???

262obsession's picture

how do I access an article??? (post #173005)

262obsession on Sun, 08/02/2009 - 12:31
in

This is so frustrating. I'm logged in as a member, but every time I try to access an article designated by an M, there's no way to view it. Help!

-A +A

(post #173005, reply #2 of 14)

by Piffin in reply to 262obsession [original] on Sun, 08/02/2009 - 15:06

I assume M stands for money, honey. or maybe magazine....don't know. I don't do the whole FHB site

The forum here is free, but most of the articles from the magazine are for paying members. I figure I already pay enough for the magazine so...here I am in the free forum for cranky old men.

 

 


Welcome to the
Taunton University of Knowledge FHB Campus at Breaktime.
 where ...
Excellence is its own reward!

 

 


or try this site for the whole gang

http://forums.delphiforums.com/breaktimeclass/start

(post #173005, reply #9 of 14)

by 262obsession in reply to Anonymous [original] on Mon, 08/03/2009 - 19:20

Thanks.  I already pay for the magazine too, so I agree, that's enough.  Thought I might be able to pull up an article here and there, but not worth it for me to pay more for that privilege.

(post #173005, reply #10 of 14)

by Mike_Maines in reply to Anonymous [original] on Mon, 08/03/2009 - 23:03

To each their own, but being able to instantly search for and print any back article has been very useful in educating our clients, carpenters and designers.  Sure beats browsing the issues the old way, though that's still good if you're not searching for something specific.


 

(post #173005, reply #11 of 14)

by 262obsession in reply to Anonymous [original] on Mon, 08/03/2009 - 23:30

Are most of the articles up, or just select ones?

(post #173005, reply #12 of 14)

by Mike_Maines in reply to Anonymous [original] on Tue, 08/04/2009 - 00:18


    I thought it was all of them but it looks like it is selective:
    Become a member today to access pro-level advice and dynamic new interactive features including:

    • 1,500 articles in-depth articles and answers from pros
      The best information from the last 25 years - all of it proven know-how covering every aspect of building, remodeling, and home improvement
    • 1,550 editor-illustrated and field-tested reader tips
      Practical tips from readers like you, edited and illustrated for clarity
    • 260 how-to videos, available on demand
      Power-up your skills with informative videos that quickly show what words may not express
    • Online discussion forums and blogs
      Ask questions or weigh-in on discussions with pros, editors, and fellow builders
    • Time-saving, drill-down search feature
      Quickly access highly relevant material on any topic with our powerful search tool
    • 410 Question & Answers - reader's questions answered by experts
    • New! A Video Workshop: 'Installing Built-Up Crown Molding' that offers expert advice and step-by-step guidance

(post #173005, reply #3 of 14)

by Huck in reply to 262obsession [original] on Sun, 08/02/2009 - 16:02

every time I try to access an article designated by an M, there's no way to view it.


Its a security clearance issue.  You must have double-O status to view articles designated by "M"



bakersfieldremodel.com


Edited 8/2/2009 12:03 pm by Huck

my website

(post #173005, reply #4 of 14)

by seeyou in reply to Anonymous [original] on Sun, 08/02/2009 - 16:07

You must have double-O status


I thought it was "double naught" status.


http://www.quittintime.com/           

http://www.grantlogancopper.com/  

      
http://forums.delphiforums.com/FineRoofing

(post #173005, reply #5 of 14)

by Huck in reply to Anonymous [original] on Sun, 08/02/2009 - 16:38

http://movies.yahoo.com/movie/1808476050/trailer#9672043

bakersfieldremodel.com

my website

(post #173005, reply #6 of 14)

by seeyou in reply to Anonymous [original] on Sun, 08/02/2009 - 16:44

http://www.youtube.com/watch?v=t5aNn4Sfmas

http://www.quittintime.com/           

http://www.grantlogancopper.com/  

      
http://forums.delphiforums.com/FineRoofing

(post #173005, reply #7 of 14)

by rez in reply to 262obsession [original] on Sun, 08/02/2009 - 19:41

Greetings ob,


As a first time poster Welcome to Breaktime.


The main FineHomebuilding site has both free access to some articles and a paid membership needed for some others.


The forum you are reading on now is the FREE Breaktime forum which is just one extension of all the many wonderful avenues made available to you, the reader, by the Taunton Press executive Fathers.


Cheers


P.S. Just be wary of 'The Woodshed Tavern' which you will become curious about.


It's like a slippery creek bank that will pull you in and you'll end up  floundering about like all the other heathen that have made their way there. Good Luck.



 


 


94969.19  In the beginning there was Breaktime...


94969.1  Photo Gallery Table of Contents


 


 


seeyou invented Breaktime



 


Edited 8/2/2009 3:45 pm ET by rez

 

(post #173005, reply #8 of 14)

by Piffin in reply to Anonymous [original] on Sun, 08/02/2009 - 19:44

ooooo

Oh!

maybe the M stands for Member!

as in Paid-up Member

 

 


Welcome to the
Taunton University of Knowledge FHB Campus at Breaktime.
 where ...
Excellence is its own reward!

 

 


or try this site for the whole gang

http://forums.delphiforums.com/breaktimeclass/start

(post #173005, reply #1 of 14)

by 262obsession in reply to 262obsession [original] on Sun, 08/02/2009 - 12:31

This is so frustrating. I'm logged in as a member, but every time I try to access an article designated by an M, there's no way to view it. Help!

Viewing article problem (post #173005, reply #13 of 14)

by woodghost in reply to 262obsession [original] on Thu, 07/21/2011 - 14:06

HI, I have the same question and no one answered it.

I think we as members are expecting to be able to download a pdf. file to save and print if we want to, as is the case in 

"the Journal of Light Construction" Online membership page.

Why is it that we are only given a PRINT OPTION?  Is the site being hacked? It's wasteful to print every article on paper when you not find that particular article helpful.

So why not give your members a PDF download option and a VIEW capability?

Why not be more green? It is a big negative for your online magazine. And I have been a fan for years.

I would like to hear from you,

Sincerely, Woodghost

Set up a "print to PDF" (post #173005, reply #14 of 14)

by DanH in reply to woodghost [original] on Thu, 07/21/2011 - 16:31

Set up a "print to PDF" printer.


Of all the preposterous assumptions of humanity over humanity, nothing exceeds most of the criticisms made on the habits of the poor by the well-housed, well-warmed, and well-fed.  --Herman Melville