DIYer that installed new Anderson Bow Window. Extension jambs have about 1/4 inch camber in middle. If I get one end home the other pops out due to camber. Looking for help to get properly seated and installed.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
From not venting your bathroom to not venting your siding, understanding how things go wrong is the first step to getting them right.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
It can probaby be worked into
It can probably be worked into place by an experienced carpenter, but contact the manufacturer anyhow. Anderson will probably send you a new extension jamb under warranty at no charge.
What is the photo of??
What is this photo?
It is the jamb extension sitting on edge on a bench. I will post a better pic.
Maybe you need a flatter bench.
Golf
I haven't installed any Andersen extensions lately. But if there's been no change to them (the rabbited style), then these allowed screws fastened through the offset on the backside. Surely these would pull down any bow.
can you show a picture of the end of the pc.?
I will tonight.
Golf
I haven't installed any Andersen extensions lately. But if there's been no change to them (the rabbited style), then these allowed screws fastened through the offset on the backside. Surely these would pull down any bow.
can you show a picture of the end of the pc.?
http://www.andersenwindows.com/-/media/aw/files/technical-docs/accessory-guide/accessoryguide-0005255.pdf
.
Link did not work for me, took me to general anderson page.
Sorry golf
Must have had the shakes, there was a few too many links in that chain....
try it again....
http://www.andersenwindows.com/-/media/aw/files/technical-docs/accessory-guide/accessoryguide-0005255.pdf
Thanks! That link worked.
Cool
Is that the stuff you got?
are those any of the ways you are trying to install the extensions?
How wide extensions are you using?
Golf
So, how's it going?
I did pocket screws from the back side and it worked great. Thanks for the help!
Golf
You're welcome.