Can anyone out there tell me how much a 5″ X 18″ Micro Lam weighs per foot? I don’t like the idea of using a 25′ piece for a ridge beam!
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
By considering things like energy-efficient mechanicals, window orientation, and renewable energy sources, homes can be evaluated to meet the energy codes. Here's what the IRC has to say.
Featured Video
SawStop's Portable Tablesaw is Bigger and Better Than BeforeHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
My guess would be about 650 # or 26 # per lin. '
Edited 5/9/2002 11:17:41 PM ET by NOVY_7
According to my GP chart, an 1 3/4" beam would weigh 8.2 PLF. Take that times 3 plies (24.6 PLF) and your 25' length, and I get 615 pounds. So Novy was about right.
Of course, that doesn't count another 100# of water that it's soaked up if it was stored ouside................
Keep in mind that you'll have a heck of a reaction to deal with at both ends - Make sure you have a way to support it.
The world's full of apathy, but I don't care