Search the forums

Loading

Freeze blocks won't fit

TimGoins's picture

I need some help. I'm putting up some trusses and when I installed my freeze blocks. The height is to short. My trusses are 2x4's and the freeze blocks are also. It is just where the bottom chord or celling rafter meets the roof rafter its about 1/2  inch higher then the 2x4 freeze block. What is going on What I'm I doing wrong. Thanks Hat 

(post #90597, reply #1 of 1)

hat.. wish Blue was here to advise you... he's been boogerin freize blocks for a long time...


it's a brick deal that we don't use.. so I kow nothing about them


Mike Smith   Rhode Island : Design / Build / Repair / Restore

Mike Smith   Rhode Island : Design / Build / Repair / Restore