I need a small miter saw that I can haul around for doing small jobs. I have a 10 inch compound miter saw and a 10 inch sliding compound miter saw. Both of these are too big and heavy to easily haul around. I don’t need anything fancy, just something that will be quicker than a manual miter box and steadier than a jig saw. I remember seeing 6″ miter saws but not recently….7 1/4″ seems to make sense. What brands do you folks recommend? Also, don’t want anything too $$$$….just for infrequent use.
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
The recipe for linoleum hasn't changed much in nearly 170 years, yet it's still one of the greenest floors money can buy.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
I would buy a sliding saw if I wanted a 7 1/4 blade. This Kobalt sliding saw is very compact, gets good reviews, has a laser if thats important to you, and is $129 at Lowes.
http://www.lowes.com/pd_358937-46069-SM1850LW_0__?productId=3512783
But I would personally choose a Makita LS0815F 8 1/2" slider, a couple more pounds of weight, a little bigger blade, a whole lot more quality. About $350.
Miter Saw
Sears has a 7 1/4" slider for $169. I stopped buying Sears power tools years ago. I needed a 10" slider to cut treads for my hardwood stairs and based on review in WOOD mag I bought the Sears 10" slider which worked very well. The Kobalt will be about $50 less so I may give it a go. I'd like a higher grade tool but can't justify the $350 price tag for occasional use. The laser is ok for getting close but I don't rely on it for the final cut.
Yeah, lasers sound helpful, but I don't have a single tool with one. I have an old red colored Makita 8 1/4" miter saw, but it's not too handy because an 8 1/4" saw can't cut much. I'd rather have a 7 1/4" slider than the old Makita, but that saw is very light, as long as the blade size isn't a problem. Then, I would need the 12" compound miter skil saw, which is so heavy it once was stolen, but I found it in the field behind my house because the thief couldn't carry it to wherever he wanted to take it.