Hey Guys, I have a cantelevered deck with I-Joist below that I would like to put EPDM over my plywood. I used concrete landscaping… plates (approx. 8″ wide X 14″ long X 1.5″ thick) on another project, but this one transitions from I-Joist to 2X10 or 2X12 joists at 16″ or 24″ o/c. So, I don’t know if weight will be an issue with concrete…plates. Hopefully any suggestions are “affordable”. thanks
Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Source control, ventilation, and filtration are the keys to healthy indoor air quality. Dehumidification is important too.
Featured Video
Video: Build a Fireplace, Brick by BrickHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
not following what you did with these "concrete plates"