Discussion Forum
Discussion Forum
Up Next
Video Shorts
Featured Story
Fine Homebuilding is excited to be the official media partner of the 2024 Building Science Symposium series! This event offers builders, tradesmen, architects, designers and suppliers to discuss topics ranging…
Featured Video
How to Install Cable Rail Around Wood-Post CornersHighlights
"I have learned so much thanks to the searchable articles on the FHB website. I can confidently say that I expect to be a life-long subscriber." - M.K.
Replies
Ditch
That is going to be one fine pc.
What's the height and where's the legs..............
Hope all is well with you!
I just started this a few days ago. I applied a sacrificial seal coat after I surfaced it. The finished table will be 9' long, 49" wide at its narrowest point, over 6' wide on the crotch end. I'm looking for an old cast iron lathe bed or cast iron industrial table legs. The voids will be filled with Lapis Lazuli and clear marine epoxy. I'm building the live edge returns for the ends today.
Thank!
Make sure you bring us more of these photo's-gonna be a beauty.
4 or 3 pcs of stone would hold it up nicely if you can't find some metal to do it justice.
Best of luck.