Discussion Forum
-
Flat Roof 101 Please?
My garage / wood shop is going to need a roof soon. I'm Most definitely going to hire this out, but I would like to be able to at least…
-
Ever Shim a Toliet?
The bathroom floor is not flat and the toilet will rock (front to back) considerably if I install it the way it is now. I have about a 1/8†gap…
-
Waste pipe size and verticle drop
Currently I have about a 9" drop from the toilet closet flange to the elbow, (all 3" cast iron) and roughly 18" of horizontal run to the 3" vent /…
-
Any Body use Swanstone
Gearing up to do a bathroom remodel, (gut down to the frame) <!----><!----> My wife has picked out a Swan Stone 60" shower base, and we will be using their solid…
-
Basement insulation
Here's my story Ok, the wife wants a family room in the basement. All moisture issues have been corrected, cracks fixed and inside perimeter drainage installed. Humidity runs around 50%…
-
Generator Neutral Question
My neighbor comes over last Saturday wanting me to help him hook up a generator. We live in Delaware and the power was out all over the place from Isabelle.…
-
Brick Exterior $$$ ???
Ok, so we are looking into an addition for our Brick Rancher. Is their a rough guide to what real brick walls cost for labor?? Say for example $xx a…
-
Hey Radiant Heat Guy’s
I'm looking at Radiant heat for the CEILING of my woodshop. So I had one of the DIY radiant heat company's do a lay out for me. Long story short,…
-
Design/Build in Wilmington De?
I'm looking for a "design / build" type contractor in the Wilmington Delaware area. We are looking into an addition to our 1950's Rancher, roughly 800 Sq'. We know what…