Discussion Forum
-
regrouting tile, use epoxy?
I'll have to regrout the tiles in my kitchen, because I've discovered the dog's nails have cut into the grout seams. the floor has 12"x12" tiles with an 3/16" grout…
-
basement insulation w/ rigid foam
To insulate the masonry walls of a basement, I planned on installing rigid extruded foam panels (interior side has reflective aluminum skin) and ½" sheetrock mechanically to the block walls…
-
dividing HW heat to 2 zones
for you experienced HVAC guys, please help me with this idea. I have a HW radiator system that is 1 zone. a single feed loop in the basement runs the…
-
manuf. for slow rise foam insulation
I have an insulation application that consists of a CMU residence that has its interior wall finishes as follows. nominal 1x2 furring with 1/2" drywall plus plaster. leaving a nominal 3/4"…
-
reinsulating the attic
I'm going to add insulation to the main attic portion of a Cape Cod. The existing fiberglass insulation is in decent shape and fully encased in kraft paper, which I…
-
fixing a bouncy floor
Hi Everyone, I recently re-registered and have the following question: in my 55 yr. old Cape, the floor in one room has noticable bounce to it, the house is of…
-
using liquid foam as insulation
I'm new at this forum so pardon me if this has been discussed before. I need to insulate a narrow cavity in a CMU wall that is covered with furring…