Discussion Forum
-
Why does this work?
After many times looking at this system I think I may have found a small problem. In the attached pic the return manifold is at the top and the supply…
-
R value readings
Here it is a 2 X 8 exterior wall with R-27 FG in the wall cavity. I have a heat sensor between the exterior plywood and the Hardi-Board and another…
-
Galv Steel Transfer Plates?
Just redid a part of a RH job in N. Mich as was wondering if anyone has seen these transfer plates. The room was 264 sq.ft and had under 300'…
-
Little Green Sucker
About to start putting up 540 pcs of Hardi Siding, anyone had any luck (good or bad) with these?
-
Hot Water Recir ?
Ok it has me stumped. Customer had a recirculation line put in 8 years ago. 3/8" line comes off the HW line at the kitchen sink (furtherst point in the…
-
Spar Varnish on Stone
Lucky me, I just got back from the weekend at the International HB show in Orlando. Bad news (I think) when I got back my MIL had hired a painter…
-
OC Get Pink or not
We are putting a second story on my son's house. Will be installing a metal roofing product so we went to the supplier and got recommendations for underlayment (I have…
-
Keeping the PL on the floor joist
It was always troublesome, but now my son is the one that is complaining when he is under the joist when the gun slips off and the gob of PL…
-
Removing Insulation
We are adding a second story to my son & d-in-laws home. The Present house is 38X66 block with 10"-14" of blown cotton insulation. Best price we could get was…
-
Removing blown in Insulation
Okay, so I forgot to mark the discussion and now I need the input. Adding a second story to my son and daughter-in-laws and we need to remove the blown…