Discussion Forum
-
That was EZ – I repeat, that was EZ!!
I just came in from the garage and grabbed the camera. I cannot believe I just made this cut! I just took my EZ Repeaters out of the box about…
-
The EZ – Biesemeyer story
I was just researching the Biesemeyer table saw fence and came across this familiar sounding story: http://www.redmond-machinery.com/biesemeyer.htm I kind of see the EZ Smart as the Biesemeyer fence that you put…
-
Ugh – Saltillo should not be pink!
I swore I would never do Saltillo again but here we go. The first and last time I did Saltillo, I didn't get enough pre-seal on and it got ugly…
-
Flag Pole Considerations
I see a lot of flags on new construction that violate one or more of the laws regulating their installation and display. I just ran across this while checking a…
-
EZ way to align saw base with blade
Heads up for anyone setting up their saw for the EZ Smart guide system. I discovered a problem on two of my saws that will wreck your anti-chip inserts and frustrate…
-
GWA House update
Still plugging away... We have to close on the 21st. I'm probably gonna need a little leniency on that final appraisal and "finished" certification. :-)> Sorry, some of these are…
-
The Divine Ratio
This article was a tough one to pick an appropriate folder for. The discussion could go in so many directions. Ever wonder why some architecture just looks right and other buildings, while…
-
May not be Smart but it sure would be EZ
I've got a 7 1/4" saw dedicated to the EZ Smart system. I LOVE the EZ Smart system (very appropriately named) but I have two problems I'm trying to solve on…
-
Just plane interesting (Reference List)
I discovered this Stanley Planes Model Number Reference page while looking for info on a low angle block plane and thought it was interesting enough to share. http://www.sover.net/~nichael/nlc-wood/stanref-num.html There are…
-
How to sharpen a chisel
http://www.antiquetools.com/sharp/index.html I posted this in another thread and realized that it might be valuable to others. I was getting pretty frustrated trying to sharpen my chisels. I couldn't get a decent…