Discussion Forum
-
Garage door modification
I have a customer who has an odd questions. They just put on a huge addition to their existing house. The garage was framed with approx. 15' walls. They are…
-
Fixed the trunnion
I finally figured out how to fix the trunnion on my delta table saw. It came about 3/16" out of alignment from the miter slots. I loosened all four of…
-
Trunnion problems still
I posted on here awhile back about my new Delta table saw. The trunnion is about 3/16" off from the front of the blade to the back. I called the…
-
Table saw problems
I have a new delta 1 3/4 hybrid saw. I just noticed that the blade from front to back is almost 3/16 off from the miter gauge slot. I went…
-
rust on tools
I have a delta table saw and drill press that are rusting. They are brand new and I applied what the instructions called for. I went out today and noticed…
-
New Delta Saw
I just bought a new delta 10" hybrid table saw. It is wired for 120V. My garage is a little distance from the main electrical panel. My old contractor saw…
-
Medical office passthrough
This is sort of a weird question. Does anyone know where I can buy (if I can) one of those little pass through doors that is about a foot square…
-
Garage addition
I have a customer who would like to add on to their existing house with a garage addition. The only thing is that they want the garage on the main…
-
3 1/4 routers
What's the best 3 1/4 router? Is the Freud a decent one?
-
Siding job
I am getting ready to start a new siding job. The house has one layer of vinyl siding and also has a layer of 3/4" styrofoam. We are stripping it…