Discussion Forum
-
Shellac for the finish of an oak floor???
Situation: I had an oak strip floor installed by a "Flooring Company" and they finished it with shellac. I have heard of floors being finished with wax, polyurethane, and tongue…
-
Blade Sharpeners
I am looking for firsthand feedback on blade sharpeners. I have been looking at the Makita 9820-2 1.1 amp Horizontal Wheel Wet Blade Sharpener for quite some time now, but…
-
Roof: Gabled end overhang
Roof: Gabled end overhang I am developing a project where I want a 14" (+-2") unsupported roof overhang. I was thinking about using 2x4 outriggers approximately 16"OC on the flat…
-
Kitchen Island and Cabinet Crown Molding Questions
Question 1) Kitchen Island: What is the best way to attach the finish plywood face to the framing of the pony wall for an island? The plywood has a cabinet…
-
Hold downs for a Porch
Did I miss any new hold down requirement in the IRC??? I want to double check to make sure I didn't overlook it.
-
CONCRETE FORMS FOR PIERS
CONCRETE FORMS
-
KITCHEN CABINETS
I am redoing my OWN kitchen. Yeah, you know how it often is. I work on other peoples houses and don't have the time or money to work on my own.
-
RRP RULES ARE OVER THE TOP: This is my reply to a reply from DC when I asked for info on HEPA vacuums
by Jake0358 in reply to Dreamcatcher [original] on Mon, 10/04/2010 - 19:10 DC thinks the RRP rules are BS. DC,
-
HEPA Vacuums
The time has come for me to buy a HEPA vacuum for a RRP project that we are about to do. I have been holding off because of the expense…
-
Chisel sharpener
I'm interested in a sharpening machine that I can use for my chisel set as well as for my 8" jointer blades. I am not interested n "add on" devices…