Discussion Forum
-
18 ga fusion
Does anyone have any experience with the 18 ga senco fusion?? I want to get one but am unsure after it has taken so long to be released. Opinions?
-
Van or Truck and Trailer?
Just looking for some opinions on the million dollar question. and best makes / models too. Going to lease new.
-
Going from one man show to a crew
I' ve been running a one man renovation outfit for two years and am thinking its time to start growing. I've got about a months worth of work booked ahead,…
-
Bending MDF Base??
I have to base a small inside curve with 5/8 x 5" mdf. I'm thinking of trying kerfing the back and then wetting it to get it in one piece.…
-
Best jigsaw for collins coping foot???
Was going to buy the new bosch 1591 but learned that collinstool doesnt make the coping foot for either of the new bosch models. I am considering the 1584 (old…
-
Considering Moving
Wondering if theres any carpenters on here that live in the okanagan valley, I'm considering moving there and am wondering what guys are making out there.
Reader Projects
-
Fold up sawhorse
My sawhorses are nice and compact, can be cut on, and are made from 100% salvaged material and scrap. The bevel angle for the leg cuts is 20 degrees, and…
-
California Drywall Patch
As a renovator, I often patch small holes in drywall and learned of this method from a great taper I work with. For round holes, (moving an octagon box) take…
-
Stair Square jig
2 straight lengths of oak with a small shim glued between them. Holes drilled 1 1/2 inch on center with carriage bolts and wingnuts. A great, simple jig for laying…