Discussion Forum
-
Gas Ignition for Wood Burning Fireplace
I'm building a masonry fireplace (Rumford box) and would like to include a propane supplied ignition system in the firebox. Has anyone done this? Are their products that incorporate safety…
-
Puzzler for Sparkies
One single pole switch, one 3-way switche and one four way switch were to be ganged at a location where leaving a living/dining space, entering a hallway; living and dining lights turn…
-
Tiling over painted sheetrock
We have painted sheetrock walls but need to tile over them. Any thoughts about preparation, types of adhesives, pitfalls? Thanks
-
Melamine Panel Attachment to Sheetrock
We're completing construction of a commercial kitchen,, and need to cover the fire rated rock with a washable panel product, a white glossy melamine or look alike. I haven't researched…
-
Chimneys, concrete, and cold
I'm in the process of building a fireplace in central Jersey, and am above the roof. It looks like I'll be running into freezing weather at night pretty soon. I'm…
-
Auto-screw feed/driver for Sheetrock
We're about to hang a lot of 5/8 sheet rock, and I want an auto-feed screw gun to move this along. Any suggestions?
-
Wiring in Steel Studs
I've been wiring for over 30 years, but never did it through steel studs. I know I have to use bushings to pass wires through holes, and use clamp type…
-
Cutting steel decking for concrete pour
I'm about to build a fireplace hearth/hearth extension on a poured foundation. Need to use steel decking to support the pour, and need to cut short pieces for the areas…
-
Radiant Heat Over Wood Floor
Anyone have experience with this? We're considering it for a new home. Have been warned that, since the water temperature below the wood must be kept relatively cool, it takes…
-
Thin Hardwood Floor over radiant heat
We're considering using 3/8" hardwood flooring over radiant heat. The heating system involves the tubing running in a piece of routed out plywood that sits on top of the sub-floor.…