Discussion Forum
-
MDF and Paint
I have made some wainscotting using MDF and I'd like to paint them...Should I use a sealer first, then prime? What would you suggest?
-
Need Inspiration For Victorian “Beam”
We are doing some finish work in our home...Part of it will contain two columns holding up a "beam" (which is actually a large opeining in part of the orginal…
-
Off The Shelf Chimney Flashing
Who makes a good "off the shelf" chimney flashing? I need to counter flash my chimneys...thanks for the suggestions.
-
Best Finish for Doug Fir Floor?
In your esteemed opinion, what is the best (as in highest quality product) for a doug fir floor that will: Provide a high gloss finish Provide a durable surface and…
-
Crown Molding Backing
We're continuing the process of rehabilitating our 1881 Italianate--it's been a long haul. I've gotten such great suggestions here, I thought I'd try again...this time the question is about crown…
-
Turning Ipe (Ironwood) Balusters
I've been given some nice Ipe (ironwood) railings, but need to reproduce some balusters that are on another part of the home...I've used ipe before--and know how hard it is,…
-
Undercounter Cabinet Lighting
I'm in the process of wiring our kitchen (right now its gutte) and I'm thinking that I'd like to be able to switch on (with a dimmer) the under counter…
-
4 Switch Deep Metal Electrical Boxes
That title confuse you? I'm looking for a metal electrical box that will take 4 switches, a mud ring, and is at least 2 inches deep...Anyone know where I can…
-
10/2 For Dedicated 30 Amp Dryer Outlet?
I've got a run of about 30 feet to a Dryer. Is 10/2 wire ok for a dedicated 30 amp in my mine panel? Or would you suggest larger? I've…
-
Filling a Wide Gap Between Old/New…
...Construction. We are continuing the work on our old home...and a new addition has been framed and sheathed by my contractor/friend. Where the new and the old meet there is…