Discussion Forum
-
New Framing Nailer
My MAX round-head SuperFramer was the best framing nailer I ever used. I pretty much got to use all brands while working for others. I bought the MAX when I went…
-
Ridgid One-Arm Sawzall
I just bought this little gem at HD right when it came out about two weeks ago. Today it paid for itself many times over. I had to remove a…
-
Today I used my MM to..
I built these stairs three years ago. I calculated the riser height without accounting for the 3/4" floor. Being in a hurry, I decided to fix it later. Never found…
-
Workbench
I built this workbench with scrap wood. I picked up the vise at a yard sale for $3 last summer. I cleaned it off with simple green, then submerged the…
-
Rotozip Angle Attachment
I'm looking for one of those old Rotozip attachments that turns the action 90 degrees so some sanding disks can be attached for hard-to-reach places. My Zip is the old…
-
Good Ideas?
We probably have several threads about tips and ideas here somewhere, but I thought I'd start with a real timesaver for absentminded, aging folks like me. I have lots of…
-
Green Wall
Has any body done anything like this? It is 2X6 plates with 2X4 studs except for the jacks and sills. Blown insulation will fill the wall to form a thermal…
-
Fein MM outprioritized again. (review)
I just dropped $199 on a Ridgid SeeSnake. It works very well, although I already see some improvements that would benefit the product. The camera/light end should be easily replaceable…
-
TS3650 Update
In a couple of threads, both here and in Knots, I have added my two or three cents concerning this saw. I really like this saw; however, I have found…
-
Tiling over HomeAdvantage Subfloor
I have just installed a second subfloor for a bathroom remodel. I will be tiling the whole floor and the custom shower. The HomeAdvantage product is from HD and is…