Discussion Forum
-
How Do I Align Craftsman Table Saw?
I inherited a 3hp belt drive Craftsman that's at least 5 years old, but the blade isn't exactly perpendicular to the body. I don't see any obvious adjustments, but maybe…
-
Laundry Tip for Paint on Clothing..
Many of you may know this already, but for those who don't... Zep Orange Hand Cleaner applied to paint splatters on clothing BEFORE laundering does a great job of removing…
-
Timber Cracking Remedy Wanted
I have a large pergola (20x40)constructed of stained 10x10's that is starting to develop large checks up to a half-inch wide on top. What is the best substance to fill…
-
Recurring Wall Problem (See Photo)
I keep repairing this area of a wall next to the chimney, but the problem keeps recurring. I thought that maybe some moisture from a roof leak around the chimney…
-
Kawasaki 19.2 V Drill Sucks…
Word to the Wise... Recently got one of those cool looking green Kawasaki drills. Second time I used it the chuck failed. It won't hold a drill tight. I don't…
-
Bathtub insulation ??
I have a typical cast iron bathtub and the bottom is exposed to the crawlspace. Even in Southern California it gets cold at times, so I'm thinking about covering it…
-
Roller Screen Repair Advice?
My 1926 house has pull-down roller screens, but many don't work. Can anyone tell me where I can find information to fix these? Many Thanks.
-
Glaze or caulk windows?…
I'm re-doing some old wood windows and got very frustrated with the 2 week cure time recommended for glazing before painting. Plus, it doesn't stick to the wood that tightly. I…