Discussion Forum
-
door jamb
i have a prehung 80in door and the rough opening is plumb. and the jamb is plumb and shimed.so why do i have a uneven gap between the head jamb…
-
old school
it use to be that a while back when this forum was jammmmin everybody was there to help out.now days this forum has gotten smaller.i posted 2 posts and not…
-
tool vs tool
which is most rated higher, a 18v cordles hitachi impact or 18v cordles makita impact. (1/4 inch drive} anyone have any input.
-
gable returns
I have gable returns that just fit against the vinyl about 1"in thick x almost a 10"in rn x a few inches rs.i want to use aluminum. there are no…
-
chevy p/u ext cab black step bars.
anyone looking for step bars in mint shape,like new and all new hardware for $300. will nego. inquire at [email protected] they have padded steps.i'm in NH.CT. ifinterested.
-
Looking for used 10’6 siding brake
Looking for a used 10'6 siding bender brake.not your grandfathers though. please E-MAIL at [email protected] i'm in NH.CT.let me know the shipping cost also. Edited 2/23/2009 8:29 pm ET by…
-
stack cutting common rafters
i plan on stack cutting alot of 2x10s or 2x8 common rafters, as i mentioned in my previous post. my question is, will a 7 1/4 saw, with a big…
-
skil vs bosch
i know a few years ago skil bought out bosch. but what i was wondering is, if there using skil parts in the bosch worm-drive saws, with the bosch patten.…
-
whistleing faucet
my faucet hummmmms or whistels every time we open the hot or cold.this only happens on the kitchen faucet only.does this mean air is in the lines,or bad washers. im…
-
outside walls to gable walls
does anyone know how to interlock outside walls to a stick framed gable wall,which will have a birdsmouth and a overhang.the gable wall level cut and the outside walls will be the…