Discussion Forum
-
painting zinc plated metal
I need to paint some Simpson hold downs that will be exposed on a deck I'm building. They are zinc plated. I went to a very good paint store, Dunn…
-
threshold problem
I am about to embark on building an elevated deck, the third and final phase of a re-model in Southern California. The second phase was gutting and re-configuring a kitchen…
-
drywall weight
I am going to drywall a ceiling. The joists are 2 X4's, spaced 16" o.c. The span is 7' 9". The length of the room (perpendicular to the joists) is…
-
Bay Bridge repair
I came across this blog and I thought people on this forum would find it fascinating. Visit: http//www.sci-experiments.com/BrokenBridge/BrokenBridge.html
-
Palm Nailer
Now that I've burned through two Grizzly palm nailers in short order, I'm wondering if it would be a good idea to spend the money for one that would last.…
-
coring a block wall
I have an upcoming project and I could use some advice. There is a six foot cement block wall, eight inches thick, slightly over sixty feet long. The top of…