Discussion Forum
-
I got word about fhb having a new web site,come check it outb
Lol...8 year old ?'s ..still being answered... Lol...
-
need ! plumbing vent hole in top plate…
have a 4" /vent stack coming thru my sole plate (2x8 construction) on a outside wall...that's the wrong place for any plumbing pipes imo, so I would like to bring…
-
Your thouhths on laterally running drain pipes w/i joist
3' for a toilet... the I joist are BCI's- 16"- 90 series..... drilling laterally through the floor joists, the hole schedule works out fine/and the install guide says I can…
-
“ring shank or vinyl coated sinker”
16p in a paslode, which one's u like ? myself i've moved to the ring shank...as when i have/had to take apart a mistake..i could hardly do it (framing) ...reasons not to?..
-
Lowes top choice white wood 1×4’s vs. 5 quarter cedar “deck boards”
Ok which way would u go, I use the 1x4’s 1 foot on center going up the roof 6/12 pitch (on 24” on center trusses) as the backer for…
-
need some new/ better siding options
All rite u guys what are you using out there?? For starter’s I did my 1st house in t-111, so that’s a no-go/outdated, then I did vinyl (before it was…
-
Any builders/contractors/code lawyer type’s here? I got a “?”…..
2 ½ stories means just what? covenants say not more than 2 ½ stories high , for it to be a story the floor must be all living space right? …
-
which/what size of paslode nails
ok all, i drove all the nails in my last house with a hammer, this time i'm moving up to a paslode..(worked great building my cabin 2 years ago....so what nail size…
-
table saw at lowes!! clearnce/get u one!!
<div class="dijitTab dijitTabChecked" dojoattachevent="onclick:onClick,onmouseenter:_onMouse,onmouseleave:_onMouse" widgetid="dijit_la
-
The best #2 phillips bits u have used.
Not much to ask for my 1st post ; ). Just would like to hear what u folks think, i have about 100 bits in the tool box ..some round…