Discussion Forum
-
Slate tile and abrasion
I have a bunch of slate tile left over from a bathroom remodel that I'd like to lay down in a entrance way. I realize that slate is very soft…
-
Know of a scheduling tool like this?
I was looking for a web tool recently and after lots of searching couldn't find one. A web-based appointment scheduling tool that includes the ability to add a customer address to…
-
Motion sensor ORed with manual switch?
I've looked around and can't find a solution to what I thought would have been a common wiring situation. I want the outdoor porch light to be switch on be…
-
Matching old “StormWOOD” deck boards
Need to replace a 9x16 section of a large wrap-around deck. The existing boards are 5/4 x 6 and appear to be have been finished with something like Sikkens (e.g. stain…
-
Roof venting with XPS panels?
I'm trying something new on an addition I'm building (I'm a DIYer). The addition has a shed roof and no joists. I'm in Canada and am venting the roof by…
-
Door threshold extension installation?
I need to extend a exterior door threshold 3 inches using two extension pieces (a 2" extension plus a 1" 'finish' piece). The extension overhangs the rim joist so I'll…
-
Disgusting!
Bought a cottage this summer. Long list of To Do's and fixes to be made (like removing the glass wool insultation STUFFED INTO electrical boxes! Yikes!). Another job is to…
-
How many BTUs required?
I need to heat a tented space outdoors for construction. The space is about 750 cu ft covered with a tarp with about 5 sq ft of openings to the outside…
-
Installing wood siding in wet weather
I'm not a pro and want to make sure I am not doing something stupid. I'm about to start installing pine bevel siding to tyvek wrapped and 1x-strapped walls. I'll…
-
Exterior door trim detail question
I am wondering what looks best or is best practice in terms of where the bottom course of horizontal siding (wood, bevel) starts in relation to a door's threshold. The…