Discussion Forum
-
Aerator Flow Rates
Is there any way to increase aerator flow rates. I recently replaced my kitchen facuets with a moen unit. I am on a well and my psi varies from 30…
-
HANDRAIL BOLTS
Does anyone know what is the recommended size of handrail bolts to be used for joining sections of handrail? Is 5/16 by 3 inch a good size to use or…
-
How high can washer pump water?
Is it possible to pump water to ceiling height drain from a washing machine? And is a standpipe necessary if discharge is into a 3" abs pipe which is vented…
-
BEST TOOL FOR GROUT REMOUVAL
I have to replace 16 8x8 floor tiles with sanded grout. Ibought a bunch of carbide grout removal bits for my Dewalt drywall cutout tool and they only lasted a…
-
Concrete Readymix Question
IS it possible that wet materials can affect the volume calculation of readymix. I order a lot of concrete and seldom do I ever run short. I recently ordered concrete…
-
Making Straight Cut Across Oak Flooring
I need to make a perfectly straight cut across hardwood flooring to accept a piece of bullnose to install a staircase. A top step of a new staircse must be…
-
Shop Oil Heater
I have a gravity fed stove oil heater in mw shop. It worked fine untill I had my oil tank filled last week. Now can,t get a decent flame it just…
-
Blending in to existing Hardwood Floorin
Is it possible to blend in new hardwood flooring in to an existing floor. I want to extend a hallway into a new addition with the same type of floorong …
-
Stub For Basement Shower
I want to rough in the plumbing for a basement shower so the concrete floor can be poured. The shower is 36" x 36" with the drain centered at18". Can…
-
Cutting Vinyl Soffit with Chopsaw
Can vinyl soffit be cut on a chopsaw? I have been told to use a fine tooth blade backwards. Is this recomended ? What is the proper blade to use…