Discussion Forum
-
Using table saw to rip aluminum trim
http://eurekazone.com/images/gallery/signshop.html The ez way.
-
A tapered cut to go.
Hi Guys. Here is a tapered cut to go. Upside down and without a tablesaw. No more free hand cuts on the tablesaws. View Image View Image…
-
ez cove with a circular saw
Hi Guys. Try this next time. View Image View Image View Image You don't need the ez system. You can do the same ez coves with 2 straight edges or…
-
four pins.
Happy new and "square" year. Hi Guys. Remember the self aligning sliding square? After 10s of prototypes and 100 "eureka the wrong" The answer was so simple, that I thought…
-
D-Mix Poll.
Hi Guys. I'm looking for feedback's on the D-Mix. I thought by now we can eliminate the 3+ coats and the sanding after that. I know my communications skills are…
-
the true square formula.
Hi Guys. I know that is a simple formula to test the squareness of any orthogonal triangle. (what we call a square) But I don't remember the equation. Any other…
-
fine pyramid building
Hello guys. Been beze with the ez my life isn't so ez. But I manage to have some fun yesterday building an ez pyramid ...under 30 minutes. View Image View…
-
zero to three 48″ crosscuts
Hello. Need some help here. We don't have a tablesaw and we try to estimate the time for three consecutive cross cuts on a 48" panel. Thanks in advance. YCF…
-
Plaster restoration specialist. (d-mix)
hello. this is the latest from the D-mix saga. 54559.175 I thought is better to start a new thread and see how the D-Mix can make YOU money. Coffee is prohibided…
-
Hilti Circular saws.
Hi Guys. Anyone use the new Hilti CS? http://www.us.hilti.com/holus/modules/prcat/prca_navigation.jsp?OID=-16071 Thanks YCF Dino