Discussion Forum
-
Tambour Doors
I've been reading about the new router bit set for making tambour doors. I was all set to order them but, when thinking about it, I began to wonder if…
-
Finish for a shop floor
My new workshop is up, dry-walled and ready for a floor. My question concerns a finish for the plywood floor. I'm using 3/4" plywood. I like the look of the…
-
Shop Floor Using Green Treated Stringers
Help! I've completed a workshop and am about to install a wooden floor using 2x6 green treated stringers and screwed down 3/4 untreated plywood over a concrete floor with 2…
-
Symbols in the message listings
Can someone tell me what the symbols next to the message listings mean? I'm referring to the paper clips, stars, bullet dots, etc. Thanks for the help.
-
Heating donshop
The floor has been poured and I started framing the walls to day. Thanks to all who have helped with my questions. This weekend, we dedicated a new Habitat home…
-
HARDIPLANK cement siding
Thanks for the answers about Hardiplank. I told Mad Dog that I'll have to get a digital camera and post progress pictures. Don
-
HARDIPLANK cement siding
I'm starting to build a new workshop and planning to use HARDIPLANK (cement) lap siding. Do any of you have any experience with it? Their spec sheet says butt joints…
-
Heating donshop
I'm planning a 24x34 shop with a slab on grade floor. I intend to put 2x6 sleepers over the slab with a plywood floor. I've been planning an overhead sealed…
-
Workshop Construction
I'm planning to build a 24' x 34' workshop this spring. I plan to use attic room type trusses with a 10/12 pitch. I'm also planning to use 10' -…
-
Senco DuraSpin Drywall Driver
Has anyone had experience with the Senco DS200-14V Driver? Our Habitat for Humanity work crew is thinking about getting one. What's you experience/opinion? Are there better tools? Thanks for your…