Discussion Forum
-
Plywood thickness for cabinet cases?
I would like to ask what are the pros and cons of using half-inch versus three-quarter inch plywood for kitchen cabinet cases? Mostly I've seen the 3/4 used for the…
-
Removing pole barn poles and modifying trusses questions.
I might be tearing down a pole barn and rebuilding it at another location. It's only ten or fifteen years old, and in pretty good shape, so I plan on rebuilding it…
-
Questions about fastening drywall with nails.
Quick couple of questions here. When I put up drywall I typically tack it in place with a few nails. Then after a few sheets I go back and finish…
-
Anyone plan on building the “Ultimate Miter Saw Stand” from the new issue?
I was just reading the artcle in the newest issue on the miter saw stand. It caught my attention because I have been wanting to put together some type of…
-
Need a drill for mixing joint compound.
In another post I mentioned that I burned up my hammer drill mixing joint compound. I'll be replacing it with a Milwaukee hammer drill. I also own a Milwaukee hole shooter…
-
One day drywall patch; anyone use this method?
I recently came across this video clip on youtube: http://www.youtube.com/user/drywallgall#p/u/21/8t6q1UEB4v0
-
Burned up my hammer drill, need a new one.
I was mixing a bucket of joint compound today and burned up my drill. I normally use a 1/2" chuck milwaukee drill for mixing, and have never had a problem…
-
How do I remove or smooth old textured plaster?
I live in a 50 year old ranch. The walls throughout the house are what looks like 3/8ths drywall with a layer of plaster over that. A few years ago…
-
Exterior painting an old home; a few questions?
This summer I will be helping paint my parents home. My parents are older now and haven't painted in quite a few years. I will probably do the bulk of…
-
Do I really need an impact driver?
I've been hearing a lot about impact drivers lately, and have considered purchasing one. I'm a homeowner, not a tradesman, but I've done a lot of remodeling over the years.…