Discussion Forum
-
wire size for 200 amp panel
. Edited 10/1/2002 6:09:05 PM ET by drptop70ss
-
pouring a cement slab in sections
I am ready to pour the slab in my 40x60 pole barn, but I cannot get the cement trucks all there in one day. So I am putting boards in…
-
What to clean siding with before stain?
Just started installing rough sawn pine on my barn project, and some of the boards have stained grey in spots from water sitting on the boards, and others look like…
-
Rough sawn pine, wet vs kiln dried, etc.
I have been pricing rough sawn pine for my barn project, and figured it would be not too expensive, but maybe I am wrong? I have been quoted .75 a…
-
siding suggestions for a barn
I have been moving along the last month building my 40x60 barn which is actually a 5 bay garage for working on old car resto. I am putting OSB sheathing…
-
Roof purlins for truss roof question
Finally moving along on my 40x60 pole barn shop, trusses will be 40' clear span, 4/12 pitch and 4' OC. My question is for the roof purlins, believe the truss…
-
Need more help with pole barn footings
I am stumped at what to do! As I stated in my other post, I hit water while digging footing holes for a polebarn. Digging down 4' would end up…
-
Hit water while digging pole footings
Just started digging holes for a pole barn, 40x60. I am digging 4' down, and was going to use 12" sonotubes filled with 1' of cement and then set the…
-
Some pole barn construction questions
I am planning on putting up a 36x60 pole barn within the next few months and have seen a few different finished buildings and have some questions. I will be…