Discussion Forum
-
Bilco Bulkhead Tune-up
Looking for some tips and tricks to tune upa bulkhead door that seems a little twisted and not sitting just right. It is a new foundation and mounted square and…
-
Which Windows and Doors?
I am a contractor who is in the planning stages of my own house. As a contractor, I have seen a lot of different materials used which make the choices…
-
Pergola Question?
Client wants to add a pergola to the front of the new house we are constrcting. One side attached to house, other side on posts. 22 feet long, 6 feet…
-
Hardwood flooring stain.
My client wants a grayish type stain on new quarter sawn white oak. Finding it tough to find this color stain in inerior stains. Cabot has all sorts of colrs…
-
Hitachi Impact Driver deal
Lowes here in CT had 12v impact drivers with 2 batteries on clearance for $89 today. Great deal for a good little driver.
-
Mass sub references
I have a very good client who would like me to build their summer home in Westport Mass for them. I usually only work in Conn. and RI Problem is…
-
Radiant Cooling?
Anyone have any input on radiant cooling? I have radiant heat in slab already and was wondering if any systems were offered for cooling. Any input good or bad on…
-
Recessed Light Spacing
I am in the process of finishing an attic space which has 4 foot knee walls 16' apart, 8' high flat ceiling in the center, and 45 degree ceiling/wall between…
-
Mass. Builders License ?
I have a very good client who wants to build a summer house in Westport, Mass. I am licensed in Conn. and RI. Those two registrations couldn't be any easier…
-
Stripping a fiberglass door?
Looking for any tips or advice. I have two fiberglass doors I need to refinish, one is stained, the other painted. Anyone know of some stripper that might be safe…