Discussion Forum
-
drawing stairs for permits
can anyone give me an idea where to look for 'drawing' some stairs for my permits. i got the general plans already submitted and approved but just don't know how…
-
better plumbing … mag # 188
article 'better undersink plumbing'july o7 (pp62-63) can figure out how to connect flange from bottom of sink to #1 in image. any help is appreciated. the threads on the white…
-
wiring 240 submersible well
Finally got the well drilled. The submersible has (4) 12 gauge wires that I need to connect the float valve to. Here's the problem I'm running into. The float valve…
-
my door error
Moved out our front wall to enclose part of the unused front porch and installed a new 3-0 door. There is only less than 3/4 inch (see pic) keep the…
-
conflicting electrical info
I'm planning on installing a cove heater, those up by the ceiling, so my 8 month old will not burn herself on the current plug-in oil finned one. Here's the…
-
leak problem with pvc to pvc
Got a 1000 gallon holding tank for the well and the main connection out of the tank is a large threaded black PVC to the white PVC (I brought and…
-
Chlorination injection for well
anyone familiar with this? I want to install one on our well Looked at UV, but there seems to be some draw backs. Thanks for any input!
-
penofin “skim layer”
dog gonnit, thought I had it air tight. peonofin tells me to "dump it." any ideas what I should you to thin it? i can use it on my fence…
-
dutch door problem
a friend of mine pulled this off a job, but his helper dropped it and cracked the upper door. any ideas how to fix this? PS the upper door is…
-
ant damage
helping a friend with cracked tile and discovered these little pockets of softwood "insulation" (it's almost like acoustic tile but 3/4 wood type product)they use back when the house was…