Discussion Forum
-
Balancing Valve Installation Problem
Balancing valve installation problem. I am remodeling my bathroom and am installing a new balancing valve. I was planning on using pex between the faucet and shower head connection. The…
-
Contractors Kerdi and Ditra Question
All the discussions I have read indicate that Schluter Kerdi and Ditra are the best products on the market. But I yet have not found anyone in Northeast Pennsylvania that uses…
-
Remedy for nicked wire
I managed to nick a 120 VAC cable while removing sheetrock. What are my repair options. The cable does not end at a J-box so I can't slip a raychem…
-
Plumbing Venting Question
Two lavatories are connected to a vertical 1-1/2" drain pipe. The drain pipe routing is 2 feet down 17 feet horizontal and 12 feet down before it connects to the main…
-
Bathroom remodel
This is my first bathroom diy remodel. I am getting ready to lay down a new tile floor in the bathroom. The subfloor is currently 1/2" plywood. I plan to…
-
Schulter
I am planning to remodel two bathrooms and would like to use Kerdi and Ditra in the bathrooms. My question is? Has anybody experienced any problems using Schulter products. Again…
-
Radiant Floor Heat
I am remodeling two bathrooms and would like to install electric radiant heat before installing the tile. My question is, is there one manufacture that is better than the others? …
-
Plumbing
Need help with a plumbing problem. I don't get the cyclone action when I flush the toilet. I removed the toilet and verified no blockage in the soil pipe. The toilet…
-
Plumbing using plastic pipe
I need to re-plumb my house since I have experienced 9 pin hole leaks in my copper piping. House is 10 years old and I had all the water tests…