Discussion Forum
-
New CMS…DW713
Notice a "new" saw from DeWalt...an DW713... 10" CMS 13 Amp motor...bevels -3 to 48 degrees...35 lbs a "true" dual bevel 10" would've been nice...soo why??? rustbucket
-
Itching for a Thomas and Hitachi…
Contemplating new pneumatics... Thomas T-200ST or T-2820ST compressor - extra $$$ for dual cylinders?? Hitachi N5008AC stapler - 3/8 and 1/2 ply underlayments Hitachi NT65MA2 finish nailer - base/trim work…
-
Removing Ivy (Hedera) from Stucco…
Had a wall of ivy removed from the side of a house...followed up with an pressure wash...cold water, 2400 psi with an 15 degree nozzle...no go. Any input on cleaning…
-
Spray or Roll
Just contemplating...kitchen, two baths, eight doors and trim - gloss. Three bedrooms, family, dining and halls - flat. Removed wallpaper from dining and two walls...will prep and prime. Ripped out and will…
-
Bosch B1750???
Came across a Bosch power planer...# B1750, low usage... any comments or is this just obsoleted junk? Did a search...nothing popped. I've never had a need for one or maybe…
-
Bosch 1582 Jigsaw
Needed to cut close to the wall...2x6 T&G subfloor. So I grabbed the jigsaw because it's there...plugged it in and kicked the switch. Three strokes!!! three strokes and leaves me…
-
Pigtail worm drive???
OSHA 1926.302 states - use of electrical cords for hoisting or lowering tools not permitted. Although I recall a Bosch rep stating "DC" can assist lowering tools on jobsites...hehe. On my tools...it…
-
Hitachi…or Dewalt
in the market for a miter saw...had a 10" Delta, cast iron base, vertical handle...solid saw...lent it out...never returned. Like the DeWalt DW703...thinking of the Hitachi C10FCE. I hear DeWalt…
-
Tight spot…under the toekick…
Replaced an bathroom floor recently...but didn't want to remove the cabinet. To achieve a clean cut under the toekick I roughed it with the sawzall and finished it with an offset…
-
Rigid R3210 ???
Been using an Skil HD77...dreaming of a new toy...Skil HD77M or Rigid R3210. Any experience with the R3210 out there...sure looks pretty... Just eating dust