Discussion Forum
-
classic truck bed
I'm helping a friend restore a 1940's Chevy pickup and have been given the task of creating a finished floor foor the box. This, as with everything, is budget minded. …
-
spray foam or cold roof retrofit
I met with a client today (Roch., NY) who had severe ice issues. He needs a complete tear-off (2 layers w/ shakes). There are a number of dormers that are…
-
outfitting a new (2 me) truck
I have been trashing my equipment in my bed for far too long. I am looking at a new (2004) long box pickup to replace my old girl and am looking…
-
sump issues
About 3 years ago I put in a new sump crock and perf. pipe around the perimeter of my basement. The system has worked great, the pump runs often, but the difference…
-
trouble w/ pl urethane
I have used PL concrete caulk many times in the warm weather in western NY. I have a friend living in western WV that asked me to come down and…
-
first time Azek install Q’s
After going through the manufacterers install instructions, I guess I'm confused as to what fasteners to use. I've done an advanced search here and still can't seem to answer my question. …
-
Convert a HW tank to direct vent
Last fall I replaced my HW tank with a new A.O. Smith 40 gal. gas that vents through my chimney. I'm going to be doing my roof this spring and…
-
silly flipping shows
I've seen a bunch of them. "It isn't in the budget" burns my @#$. These people in high priced cars show up and give a hard time to the little…
-
frustrated w/ crown
It's been about ten years since I've done my last stain grade crown molding. I'm setting up a showroom for a cabinet supplier and the molding is all prefinished so…
-
not hijacking alwaysoverbudget
I'm looking at a 24x17 additon that will have a ridge running the 24' length, north to south. The west wall is approx. 14'6" with a 3/12 roof and the…