Discussion Forum
-
venting a microwave oven
i am buying an over the range microwave oven. my stove is located on an interior wall and i want to vent the microwave to the exterior wall. total run…
-
sheetrocking over plaster ceiling
the plaster ceiling in my large living room (20 x 26) has lots of cracks but is not sagging. it has wire lath and plaster thats is as hard as…
-
wainscoting
i want to install wainscoting in my diningroom, 36" high, using a gridwork of 1x4 and 1x6 with a panelmoulding for the boxes.my question is after i apply the 3/4"…
-
milwaukee mitersaw
i have a 12" milwaukee mitersaw and the dust chute is somewhat oval. any idea how i can hook that up to my shopvac? thanks for any help.
-
senco bradnailers not countersinking
just bought the new cordless 18g fusion bradnailer from senco. the tool does not countersink the nails deep enough to hold any woodfiller or putty. i never understood the reason…
-
cordless bradnailers
does anybody know when senco is coming out with a cordless/hoseless 18 gauge bradnailer? i know they came out with a 15g finish nailer which got great reviews besides being…
-
cordless 18g bradnailers
i have a senco airfree 25 cordless battery operated brad nailer. doesn't shoot nails anymore it only winds up.i need a cordess bradnailers a couple of times a year. can…
-
crownmoulding on a gabled dormer
i have a gabled dormer and want to install a crown or attic moulding under the overhang and up the front to the peak. cant figure out the weird angle…
-
outswing patio doors
the customer wants 2 kolbe outswing doors with matching sidelights. rough opening is almost 10 ft wide by 7 ft high, there is no overhang on the exterior to protect…
-
framing against fieldstone
i need to frame an 8' opening for a door with sidelights. my walls are fieldstone so the 2x4s will not sit flush, what kind of fasteners do i use…