Discussion Forum
-
10 OZ. TITANIUM STILETO HAMMERS
ANYONE HAVE INPUT ON THESE? Edited 9/18/2008 7:54 pm ET by zorrosdens
-
MAX 23GA. MICRO PINNER&BRADS
HAS ANYONE TRIED BRAD HEAD PINS IN THIS GUN? IT LOOKS IDENTICAL TO THE CADEX AND WAS JUST WONDERING.....
-
Festool CT22E or CT33E???
It's a bit here or there....But...just looking for fast inputs regarding getting the Festool CT22E or the CT33E dust extractor. Looking for hands on inputs. I know they are both…
-
How good is Festool Dust Extraction
I'm bidding on a Job that needs to have the doorcasing resanded at the head/leg joint (some misalignment/poor-craftsmanship) and general smoothing out of the nail points (1x4 mdf with a 1/4…
-
Skil MAG77 w/BAG
Hey, just to input about this deal on Amazon. The saw is great, of course, and the bag is also. For a finish guy sometimes just shelving or bunching tools…
-
Input Re: Makita MAC 5200
Does anyone have input regarding this compreesor....my bos is in Tenn. and needs to get a new compressor. He is ready to buy a reconditioned 5200, about $270, and is…
-
Chosen Wormdrive
First, let me say that your responses to me regarding the Skil Mag77 and the Bosch and the Rigid wormdrives was very helpful and made me take a closer look at all…
-
Bosch vs. Skill Mag77 Wormdrives
Looking for input regarding the pros and cons in the field on the Bosch compared to the Skil. I'll be reupping on a wormdrive, as that's what I have in…
-
Pins for MAX 23ga.
Hey All, Would like input for the most used pins for the 23's.....I'm going to be purchasing the MAX NF235A and wanted to ask what you all use the most. What I generally get…
-
Trick Router
Not really a trick router, but a very cool kind of set-up: Because all I used to do was completely mill and prehang and set doors and jambs and if…